Links Frequently Asked Questions
Cabinetry
 

Click on the image for a larger picture
Veneer Special Veneers - Veneers, or thin sheets
of wood, are cut and glued to various
surfaces of the cabinetry such as door
panels, tops, sides, etc. for a distinctive
look or to dress the end-grain of a board.
Because veneer is so thin and yet retains
the figure and color of the wood it is taken
from, it can be cut and placed into various
patterns for a beautiful effect as in this
quartered cherry application.

Distressing - Distressing is a technique
of artificially aging the wood to give an
"antique" or period look. There are many
different types of distressing including:

Crackle - Cracks in paint/finish
that mimics long weathering of
painted surface complete with
patina imparted by airborne
elements, which settle in the
cracks over time.

Rub-thru - Finish or wood
showing through at wear spots,
tapered corners or crested areas.

Crackle
Rub Through
Natural Cherry Natural Wood - Leaving the wood unfinished
except for a light transparent topcoat for
protection.

Wormholes - Simulation of holes left by boring
worms or larva. These can either be grouped in a
random pattern or as select holes in random
areas.

Round or Square Pegs - Single round or square
dowels placed in corners with endgrain showing
to mimic antique joinery.

Fly Specs - Spatter marks resembling fly specs.

Cow Tails - Like fly specs except curved like a
comma.

Chain Dents/Dings - Small indentations
simulating wear and tear over time.

Wear Corners - Sanding through on corners to
give worn effect.

Rasping - Rasping as the name implies is done
with a rasp, a tool similar to a file with rough
biting teeth on one surface. Rasping can be
either light or hard. Light rasping gives a hand-
tooled look, whereas heavy rasping leaves a
rough scar across edge.

Stain Stain - A catalyzed process stain is applied
to the wood to add color.
Stain and Glaze Stain & Glaze - After staining, a contrasting
glaze is applied to the wood and wiped off.
The Glaze will adhere in the natural nooks
and imperfections of the wood surface and
between any mouldings to provide a contrast
and complementary color.
Paint Paint - A high-grade enamel is applied to
paint-grade wood in the desired color. Paint-
grade wood is typically a very tight-grained
wood like sycamore, birch or poplar that will
take paint well without any grain showing
through.
 
Paint and Glaze Paint & Glaze - As with the stain & glaze a
contrasting glaze is applied and wiped off.

Copyright BCV Designs Inc. All rights reserved.